Safety­and­setup; Safety; Connecting The Charging Station To The Television; Charge The Battery For The Remote Control - Grundig EASY–USE REMOTE CONTROL G-VRC-01 Bedienungsanleitung

SAFETY­AND­SETUP

Safety

Please note the following instructions when set-
ting up the television set:
The remote control is designed for use in dry
7
rooms. If you do use it outdoors, make sure it is
protected from moisture such as rain or splas-
hing water.
Never expose the remote control to moisture.
Never open the remote control under any cir-
7
cumstances. Warranty claims are excluded for
damage resulting from improper handling.
Only clean the remote control with the cloth
7
provided. Do not use water with soap or de-
tergent.
To ensure fires do not occur,
7
always keep candles and
other open flames away from
the remote control.
Do not expose the battery to excessive heat
7
such as direct sunlight, fire, etc.
Note for the Product Package
7
Packaging materials of your product are recy-
clable. Please ensure that packaging materials
of your product are disposed of separately
in accordance with the regulations set by the
local authorities in order to proceed environ-
mental friendly recycling process.
­ - -------------------------------------------------------------------------------------------------
Connecting­the­charging­station­
to­the­television
1 Insert the Micro USB connector of the sup-
plied cable to the socket of the charging sta-
tion.
2
Insert the USB connector of the supplied
cable to the socket
(HDD)« on the television.
Charge­the­battery­for­the­
remote­control
Notes:­
Fully charge the battery before initial use
7
and after a long period of inactivity (charge
time approx. 3 hours).
The television must be switched on during
7
the charge process.
Optimum charge and operation results are
7
acheived with an ambient temperature of
between 15 °C and 40 °C.
The remote control can also be charged us-
7
ing a PC or via a USB adapter.
With a fully charged battery, the operating
7
duration of the remote control is approx. 12
hours.
1
Switch on the television from stand-by using
the device remote control.
2 Place the remote control in the charging sta-
tion.
– The display is illuminated red.
Note:­
The display illuminates blue if the battery is
7
fully charged.
1« or
»USB­ »USB2­
ENGLISH
9­