Getting Started; Fm Radio Mode - auna Vertiplay Bedienungsanleitung

EN
22

GETTING STARTED

Before using the unit, check that the local mains supply is compatible with
the 100-240 V~V/ 50Hz, Do not plug or unplug the power cable when your
hands wet. When planning not to use this unit for long periods of time,
please discounnect the plug frome the wall outlet. When disconnecting the
power cord from the wall outlet, grasp the plug; do not pull the cord inorder
to avoid shock risks caused by the damaged cable. Put the DC Adaptor jack
connected with the main unit Cable jack, then plug in wall outlet and the AC
socket.

FM RADIO MODE

1. Press POWER/SOURCE button to switch on, Default at FM mode;
2. SKIP/TUN± the station:long press the SKIP/TUN±button, Will
automatically search and stop,then you can short press SKIP/TUN±
button to manually search the radio.
3. Save the station, Listening Station as 100.8MHz,short press MODE
button, LCD will display "P01" and flash display "MEM". Press the SKIP±
button to select the save station No. as P05,then short press MODE
button to confirm, this station 100.8MHz saved to No. "P05" , total of 20
radio stations can be saved.
4. Select station: If you want to listen to the saved station, press the MODE
button briefly, press the SKIP ± button, select the station No. to save.
5. Scan the station: Short press the SCAN button on the remote control,
will automatically scan start by 87.5MHZ, and save the search to the
radio.