Inhaltsverzeichnis
Werbung
Verfügbare Sprachen
Verfügbare Sprachen
UNPACKING AND SET UP
•
Carefully remove the unit from the display carton and remove all packing material from the unit.
•
Unwind the AC power cord and extend it to its full length.
•
Unwind the FM Antenna wire and extend it to its full length.
•
Place the unit on a stable, level surface, convenient to an AC outlet, out of direct sunlight, and
away from sources of excess heat, dust, moisture, humidity, or strong magnetic fields.
•
Connect the plug to your AC outlet.
POWER SOURCE
This system is designed to operate on normal 230V 50Hz AC only. Attempting to operate this system
from any other power source may cause damage to the system, and such damage is not covered by
your warranty.
Note:
You will note that this system is equipped with a polarized AC power plug. If this plug does not fit
into your existing AC outlet, you probably have an outdated non-polarized AC outlet. You should have
your outlet changed by a qualified licensed electrician.
Preparation for Use
6
Werbung
Inhaltsverzeichnis
