English - Black & Decker KC9006 Bedienungsanleitung

CORDLESS SCREWDRIVER
KC9006
CONGRATULATIONS!
You have chosen a Black & Decker
tool. Our aim is to provide quality
tools at an affordable price.
We hope that you will enjoy
using this tool for many years.
EC DECLARATION OF
CONFORMITY
KC9006
Black & Decker declares
that these products conform
to: 98/37/EC, 89/336/EEC,
EN 50260
Level of sound pressure,
measured according to EN 50260:
L (sound pressure)
pA
L (acoustic power)
WA
Always wear ear protection
if the sound pressure
exceeds 85 dB(A).
Hand/arm weighted vibration
value according to EN 50260:
Colin Wills
Director of Engineering
BDCI, 4/F, 2 Dai Wang Street
Tai Po Industrial Estate
Tai Po NT, Hong Kong
KC9006EUR.PM65
INTENDED USE
Your Black & Decker screwdriver
KC9006 has been designed for
inserting and removing screws
and nuts using the appropriate
accessories.
This tool is intended for
consumer use only.
SAFETY INSTRUCTIONS
Warning symbols
The following symbols are used
in this manual:
Denotes risk of personal
injury, loss of life or damage
to the tool in case of non-
observance of the
KC9006 instructions in this manual.
dB(A) $1
dB(A) $2
Denotes risk of electric
shock.
Read the manual prior to
operation.
Know your tool
Warning! When using
KC9006 battery-powered tools,
< 2.5 m/s 2
basic safety precautions,
including the following,
should always be followed
to reduce the risk of fire,
leaking batteries, personal
injury and material damage.
Read all of this manual
carefully before operating
the tool.
Before operating the tool,
make sure that you know
how to switch the tool off
in an emergency.
Retain this manual for
future reference.
5
E N G L I S H
5
26-07-2001, 11:37