Product Characteristics - Siku Infraplate pro Bedienungsanleitung

14. The hot plate consumes more power than smaller devices, therefore it must be
provided for a separate 5A-socket.
15. The device must be kept away from inflammable objects, otherwise there might
be a risk of fire.
16. The hot plate must not be placed next to or onto inflammable or meltable objects
such as wood, straw, curtains, plastics, etc.
17. Safety distance: 30 cm to the front, each 10 cm to the right and left side.
18. Persons must not jump or climb on the hot plate, high pressure or impacts on the
device must be avoided.
19. Single parts of the body must not be exposed to the heat of the hot plate for a
longer period, otherwise there might be a risk of slight burnings.
20. The hot plate must never be covered with heat-insulating objects such as towels,
blankets, or carpets
21. In order to avoid electrical shocks, burnings, or similar accidents, it must be made
sure, that the hot plate is disconnected from the power source and allowed to
cool down completely before any cleaning works are performed.
A dry cloth should be used for the cleaning. Benzine or acidic detergents must
not be used for the cleaning.

PRODUCT CHARACTERISTICS

• The hot plate has been designed for the purpose of an efficient, comfortable,
and healthy heating system for domestic use.
• The hot plates provide for both a reduction of the air circulation and the
maintenance of a clean, silent, and dustfree indoor climate.
• The devices may be installed either to a wall or ceiling.
• The devices are available in various sizes and designs.
• Once the operating control lamp starts blinking blue (only with devices for wall
installation), the device is in service.
5