ACCESSORIES
Required accessories for heating plates:
The BT710 and BT010 room thermostats require a receiver.
Note:
Info according to new ERP- Standard 1188:
As of 2018, Infraplate pro Infrared non-storage type heating appliance must be operated
only as a combination of a room thermostat with integrated timer and room ventilation
detection device.
PT712 - digital thermostat with room sensor (item no. 50446)
•
Enables regulation based on the room temperature
•
The required temperature can be changed quickly
•
2 weekly programmes with 6 temperature changes per day
•
Power reserve for more than 100 hours in the event of a power cut
BT710 - radio room thermostat (item no. 50434)
•
Used to switch electrical heating systems in houses, apartments and offices
on and off based on the temperature
•
Can control up to 9 receivers
•
Simple and flexible installation - without mains connection and cables
BT010 - radio room thermostat (item no. 50435)
•
Can trigger one receiver
•
The range within a building is at least 35 m depending on the receiver
•
Benefits: the set temperature can be changed quickly using the hand wheel,
quick selection switch for night moderation, frost protection
BT001 - receiver for BT710 and BT010 - flush-mounted (item no. 50436)
•
Suitable for switching infrared heaters, electric radiators, etc. on and off
•
The BT001 switches the connected consumers off and on based on the data
transferred from the transmitter
•
It is installed in a flush-mounted box
BT003 - receiver for BT710 and BT010 - in a plug-in socket (item no. 50437)
•
Suitable for switching infrared heaters, electric radiators, etc. on and off
•
The BPT003 switches the connected consumers off and on based on the data
transferred from the transmitter
•
Plugged directly into the socket
3