A-B Editing (On Cd Changer Only) - Philips CDR-800 Bedienungsanleitung

xp CDR 800/00 eng.-1.1 18-07-2001 13:54
Special features

A-B editing (on CD changer only)

You can create a "track" by marking a passage of music
within one track on the current disc.This new "track" can
be used for recording or playing.The minimum track length
is 4 seconds.
Note:You can only make an A-B edit for a normal Audio
CD(RW).
1 Press A-B EDIT on the set.
starts blinking, TRACK and the current track
EDIT TRACK
number ? are displayed.
Rotate the ¡ EASY JOG ™ control until the desired track
2
number is displayed.
3 Press YES to confirm the selected track.
FROM A = XX : XX and the track time will be displayed.
The first 4 seconds of the track will be played
continously.The initial position of marker A is always the
start of the chosen track.
To fast forward to the desired start position press 5 or 6
0
on the set.
To fine tune the position then rotate the ¡ EASY JOG ™
0
control.
4 Press YES or A-B EDIT to confirm the position of marker a.
TO B = XX : XX and the new "track" time will be
displayed.The first 4 seconds before marker position B
until marker position B will be played continously.The
initial position of marker B is always the position of
marker A plus 4 seconds.
To fast forward to the desired stop position press 5 or 6
0
on the set.
To fine tune the position rotate the ¡ EASY JOG ™
control.
5 Press YES or A-B EDIT to confirm the marked passage.
is shown, A-B and the track edit time are
EDIT TRACK
displayed.
The new "track" will be stored.
Press PLAY/PAUSE 2/; to play the "track".
0
Press RECORD to record the "track"
0
(also see "Recording").
Note: A-B EDIT can also be pressed during play.The Track Edit
procedure will then start from the position where A-B EDIT was
pressed.
24
Pagina 24
Clearing the A-B edit
1 Press NO during stop.
CLEAR A-B ? is displayed.
2 Press YES to clear the markers.
The markers A-B are cleared.
Note: If you open the CD changer tray the A-B edit is deleted.