Solmetric SunEye Kurzanleitung Seite 5

Install the Solmetric SunEye
1
Desktop Companion Software from
CD-ROM
• Insert the CD-ROM that came with the Solmetric SunEye into the CD
drive on your Windows Vista, Windows XP, or Windows 2000 desktop
computer.
• If the welcome screen does not automatically open, click
Computer and double-click on the CD drive or directly run setup.exe
from the CDROM. Follow the instructions. If not already installed, it
will automatically install Microsoft ActiveSync (for Windows XP and
Windows 2000) or Window Mobile Device Center (for Windows Vista)
which is needed to communicate with the device.
•
During the installation, the device connectivity software will try
to connect to the Solmetric SunEye device. For Windows XP and
Windows 2000, and devices that are labeled "SunEye-100N v2",
ActiveSync will automatically start the Synchronization Setup
Wizard. Click Next to setup synchronization settings. None of the
items listed under Information Type should be checked. Click Next to
fi nish.
•
You can now launch the Solmetric SunEye Desktop Companion from
the Solmetric SunEye icon on your desktop or from the start button
Start » All Programs » Solmetric SunEye » Solmetric SunEye.
• If this is the fi rst time launching the Solmetric SunEye Desktop
Companion, or there has never
been data transferred from the
hand-held device, then there is
nothing that can be done on the
desktop at this point other than
viewing the User's Guide. You
will see a screen like the one to
the right.
•
You can view the User's Guide
by selecting Help » Solmetric
SunEye User's Guide...
•
You can exit the application by selecting
Start then My
File » Exit.
3