Solmetric SunEye Kurzanleitung Seite 10

Transfer Data To Desktop PC
7
After Installing the Solmetric SunEye desktop companion software on
your desktop PC, you can transfer your data from the hand-held unit to
your PC.
Within the desktop application select File » Transfer from Device.
This will transfer all sessions and skylines from your hand-held device
to your desktop PC.
Soft Reset
!
If your Solmetric SunEye device appears to not be responding, you
may need to do a "soft reset" to restart the application. Under normal
use, this reset is not needed. A reset will not cause you to lose any data
stored on the device.
To initiate a soft reset, press the stylus provided or the end of a bent-
open paperclip into the pin hole on the right side of the Solmetric
SunEye, next to the Device/USB port. The Solmetric SunEye device
will then reset and start running again.
More Information: For more detailed instructions or to learn
about other features of the Solmetric SunEye, you can access the
User's Guide from the installation CD or the Desktop Companion
software by selecting Help » Solmetric SunEye User's Guide.
8