Elmo HS-G1 Kurzanleitung Seite 27

B．INPUT TERMINALS
③
Name
①
MIC IN port
②
SD card slot
HDMI input ports
③
（8ch）
C．REAR PANEL
Name
Output mode
①
selection switch
②
DC IN 12V port
③
USB port
AUDIO OUT
④
port
⑤
RGB OUT port
DC OUT 5V
⑥
port
HDBaseT OUT
⑦
port
⑧
HDMI OUT port
①
To connect an external microphone (electret condenser microphone)
to input audio from the external microphone.
※When the external microphone is connected, the built-in
microphone is disabled.
To insert the SD card (commercially available).
To remove, push in again, then pull out.
To connect input devices. Max. 8 input devices can be connected.
The input source can be selected using the Channel button.
⑦ ⑥
⑧
To set the output video mode of the selected channel.
（RGB／HDBaseT／HDMI） ※The HDBaseT chnnel is for HS-G3 only.
To connect the supplied power cable.
To connect to a computer via the supplied USB cable to play video
files or audio files on the SD card.
Use a media player on your computer to play the recorded files.
（※The USB cable is not included in the HS-G1.）
To output audio. (The audio cable is not included in the product.)
※This function is available only when the analog RGB output is
selected.
※Protected signal by the HDCP is not output.
To output analog RGB images.
(The RGB cable is not included in the product.)
※Protected signal by the HDCP is not output.
To supply DC5V power to an external WHDI module. (commercially
available) ※WHDI module only, please use.
To connect to a projector or monitor which has an HDBaseT port, or
to the Receiver Box (commercially available) via a commercially
available LAN cable (CAT5e or higher).
To output digital images and sound.
(The HDMI cable is included in the product.）
27
③
②
Function
①
⑤ ④
③ ②
Function
日
本
語