Go/on 1330881 Bedienungsanleitung Seite 29

GETTING THE VACUUM CLEANER READY
1. Fit the hose on the vacuum cleaner by inserting
the rotating hose connection into the vacuum
cleaner until you hear a click. To remove the
hose, press the button at the side of the hose
connection and pull the hose out.
2. Assembling the extension tube and accessories
2.1: Fit the extension tube onto the other end of the hose.
2.2: Adjust the length of the extension tube by pressing
the locking mechanism down and pulling the
bottom section of the tube out to a suitable length.
When putting the appliance away shorten the tube
as much as possible.
2.3: Fit the floor brush onto the extension tube.
Floor Nozzle
The floor nozzle has two settings. When cleaning
hard surfaces(parquet flooring, flooring tiles, etc.),
the nozzle brushes should be extended. When cleaning
carpets and mats, the brushes should be retracted into
the nozzle. Press the brush button to switch between
the two settings.
2-in-1 crevice nozzle and upholstery nozzle
-For radiators, corners, furniture, skirting boards et c.
29