Mute Function - AUDIOropa SP-100M Bedienungsanleitung

2.7 MIC and AUX inputs
The MIC input serves to connect a microphone
with a 3-pole 3.5 mm jack plug. Input AUX is
intended as line-in for analogue audio signals
(stereo or mono). Both inputs may be used at the
same time. This makes it, for example, possible
to underline spoken commentary with music.
The level of the audio signal at the AUX input
must be adjusted via the audio source. An indi-
vidual adjustment of both inputs is not possible
via the SP-100M.
2.8 MUTE-Function
The input ports MIC and AUX can be muted by
briefly pressing on the MUTE-button. The symbol
» « is shown in the display.
Exit the MUTE-function by briefly pressing on the
MUTE-button again.
2.9 Power supply / recharge
The device is equipped with a rechargeable lithium-
ion battery of 3,7 V / 1100 mAh.
To charge the battery, plug the USB charging
cable into the USB socket of the SP-100M and
connect it to a regular USB port (computer, lap-
top, USB power supply).
The red charging status LED is lit during rechar-
ge. The LED switches off when the battery is fully
loaded.
18 English