Emerio BL-111006.2 Bedienungsanleitung Seite 13

BL-111006.2
PARTS DESCRIPTION
1. Blending cup
2. Cross blade
3. Blade base
4. Motor base
5. Grinding cup
6. Flat blade
7. Blade base
8. Flip-top lid
9. Storage lid
10. Control panel
11. Foot
NOTE: Before using your appliance for the first time, clean all of the accessories (except for the motor base) in
warm soapy water. Rinse and dry thoroughly.
USE
Caution: Make sure the motor base is unplugged from the power source.
1. Place the motor base on a firm, flat, level surface.
2. Fill the blending cup with your ingredients and connect with the cross blade for blending purpose.
Alternatively, fill the grinding cup with your ingredients and connect with the flat blade for grinding purpose.
Rotate the blade base on to the cup tightly in clockwise direction. Do not exceed the "MAX" level on the cup.
3. Rotate the cup into the motor base in clockwise direction. Make sure the cup is locked firmly.
4. Plug in the appliance.
5. Press "ON/OFF" button to turn on the unit. Press "LOW-HIGH" button once, the appliance starts working at
low speed. Press it again, the appliance will work at high speed.
If you want to use pulse function during operation, press "PULSE" button once to let the appliance stop first,
and then press ""PULSE" button again to run the appliance with full speed for 2 seconds. Repeat if needed.
6. After use, press "ON/OFF" button to turn off the appliance and then unplug it.
NOTE: This product is equipped with 1 safety switch (A) on the motor base. If the blade base is not assembled
correctly, the safety switch will not be activated and the machine will not work when switched on. Do not use
any tools to press the safety switch in order not to cause any damage.
Important!
1. For blending purpose, please cut ingredients into pieces if the food is solid. Assemble the blade base with
the cup tightly, otherwise it will leak. Do not stir dry solid ingredients only.
After 1 minute continuously operation of the appliance for blending, it is required to be stopped for 5
minutes to prevent overheating. After 5 cycles, let the appliance have a rest to cool down.
2. Please remove all hard kernels from the fruit before blending.
- 12 -
EN