Exibel BX800 Bedienungsanleitung Seite 8

Setting the speaker into Bluetooth or AUX-in mode
Press [ SET ] on the control panel (or [ SETUP ] on the remote) several times.
The display will then show the following:
"B00": Press [ l◄◄ ] or[ ►►l ] to set the bass (−10 to +10).
•
• "T00": Press [ l◄◄ ] or[ ►►l ] to set the treble (−10 to +10).
"TIME": Press [ l◄◄ ] or [ ►►l ] to set the hours. Press [ SET ] again and
•
the minutes display will begin to flash. Press [ l◄◄ ] or [ ►►l ] to set the minutes.
"SL00": Press [ l◄◄ ] or [ ►►l ] to set the sleep timer. When the sleep timer times
•
out it will automatically shut off any audio and put the speaker into standby mode.
• "ALM": The alarm can be set either using the control panel or the remote.
Using the remote:
1. Press [ SETUP ] until "ALM" appears on the display.
2. Press [ ENTER ]. "ON" will display.
3. Press [ ENTER ] again. When the hours display begins to flash, press [ l◄◄ ] or
[ ►►l ] to set the hours.
4. Press [ ENTER ] again. When the minutes display begins to flash, press [ l◄◄ ] or
[ ►►l ] to set the minutes.
5. Press [ ENTER ] to confirm.
Using the control panel:
1. Press [ SET ] until "ALM" appears on the display.
2. Press [ l◄◄ ] or [ ►►l ] until "ON" appears in the display.
3. Press [ SET ] again. When the hours display begins to flash, press [ l◄◄ ] or [ ►►l ]
to set the hours.
4. Press [ SET ] again. When the minutes display begins to flash, press [ l◄◄ ]
or [ ►►l ] to set the minutes.
5. Press [ SET ] 3 times to return to the selected audio source.
Radio
1. Turn on the speaker as described above and select FM as the input source.
The current radio station frequency will then be displayed.
2. Press [ SET ] twice. The station frequency will begin flashing on the display.
Press [ l◄◄ ] or [ ►►l ] to manually set the desired station frequency.
-
- Hold in [ l◄◄ ] or [ ►►l ] an release to automatically search for the next
detectable station.
- You can also press [
search function.
] or[ ] on the remote to perform this same automatic
8