BeeWi BBH300 Bedienungsanleitung Seite 8

8
3.6. Connecting 2 devices to the same Headphone
You can connect two devices at the same time to enjoy hands-free communication and
music streaming, only if they are using different profiles (one is using HFP, the other
AD2P). When one profile is being used by one device, it cannot be used by another.
By default, the Headphone is not preset with the multipoint feature. To enable it or
disable this feature, make sure the Headphones is off and press simultaneously Power
button and << key for about 5 sec to enable it or Power button and >> key to disable it,
for about 5 sec until the LED blinks twice in pink color (blue and red together).
After having paired the Headphone with your mobile phone, you can pair it with your
music player or PC. The music player will use audio streaming profiles (A2DP and
AVRCP), so you can use music playback and remote control features and the phone will
use the hands-free profiles so you can use the phone features.
3.7. Light and sound indicators
LIGHT INDICATOR
Red light is on
No light
Fast red and blue light blink alternately
Blinks twice every 4 seconds
Blinks every 4 seconds
Blinks twice every 2 seconds
Blinks twice every second
Blinks every 2 seconds
Note: the blue indicator will turn red in case of low power.
TONE NOTIFICATION
2 tones every 15 seconds
5 tones every 20 seconds
Fast red and blue light blink alternately
STATUS
Charging
Powered off/Fully charged
Pairing mode
Standby mode (connected)
Standby mode (not connected)
Playing music
Incoming call
In call
STATUS OF HEADPHONE
Out of range
Low power
Pairing mode
ENGLISH