Lubrication; Oiler Setting; Storage - Westfalia HY-661 Bedienungsanleitung

3. If the lever is on the largest circle – level position F (C), you have selected the
highest possible speed in clockwise rotation.
4. If the lever is in position R (D), the impact wrench rotates counter-clockwise.
Maintenance and Care
To ensure proper function and a long life time, it is essential to lubricate and
maintain the unit carefully.
For operating pneumatic tools, you need pure air. Corrosion residual, dust and
dirt in the supply line, restrain the performance and create technical difficulties. A
maintenance unit with filter, pressure regulator and oiler, connected ahead to the
tool, dehumidifies and removes dirt from the air, and regulates the operating
pressure. Also it supplies the tool with lubricant in an optimal way.

Lubrication

Pneumatic tools have to be lubricated always sufficiently. This is done continu-
ously and safest by using an oil-fog lubricator. If the oiler is mounted centrally at
the compressor or mounted firmly at the end of the compressed-air pipe installa-
tion, use only a hose with a length of max. 10 m. If the hose is longer, the nebuli-
sation disappears in the air. The oil floats inside the hose and does not arrive at
the air tool.

Oiler Setting

Hose up to 5 m
Hose up to 10 m
If you do not have an oiler at yours disposal, please put a few drops of oil into the
compressed-air connection (4) before every machine usage. Lubricate the air im-
pact wrench once more after use, especially if you do not operate the unit for a
long time.
Further maintenance work is not necessary.

Storage

Store your air tool only in dry rooms.
Maintenance and Care
every 2 min.
always per min.
7
1 drop
1 drop