Effect Performance; Mixer Effect Controls - Ecler nuo5 Bedienungsanleitung

6. EFFECT PERFORMANCE

6.1 Mixer effect controls

FX SEND selector (10)
A very flexible multi-channel assignment
system allows the user to process various
input channels at the same time. The FX
SEND button assign the channel to the
internal effect processor and EXTERNAL
FX loop.
The FX SEND signal is Pre-fader by
default. If FX LAUNCH button is ON and
EFFECT selector is activated, the FX
SEND signal gets Post-fader.
For EXTERNAL FX processing, the
NUO5 has an external
connection SEND (45) and RECEIVE
(46). Like the internal effect processing,
each channel can be assigned to the
EXTERNAL FX loop pressing the FX
SEND button. The FX SEND signal is
pre-fader by default, but is automatically
changed to post- fader if the 3 buttons FX
SEND (10), EFFECT (Encoder 33) and
FX LAUNCH (23) are activated. To use
the EXTERNAL FX "post-fader", without
processing the internal NUO5 effects,
activate the 3 buttons FX SEND, EFFECT
(Encoder) and FX LAUNCH, and place
the WET-DRY crossfader (25) on "DRY".
The FX SEND push button also controls the MIDI START/STOP functions. Please refer to chapter 8. MIDI USAGE.
Rotary/Push control EFFECT (33)
Choose the effect with the rotary control, and push the knob to activate/deactivate it. The NUO5 mixer offers 8
digital beat synchronized effects, 2 manual filters and 2 specific voice effects.
When the effect is activated, the led is blinking ; if the effect is only prepared and not activated then the led is stop
blinking (fix led). To send the activated effect in the mixer outputs, both the EFFECT control and FX LAUNCH
button (23) must be activated.
Each time you activate the LFO, Flanger, Phaser and Echo Flanger, the oscillation wave is reinitialised.
You can prepare a second effect (fix led) while one effect is activated (blinking led) ; push one time the EFFECT
control to simultaneously activate the second effect and deactivate the first one.
loop RCA
10
FX SEND
0
FX SEND FX SEND FX SEND
+10 +10
+7 +7
+4 +4
+2 +2
0 0
-2 -2
-4 -4
-7 -7
-10 -10
-20 -20
-30 -30
-38 -38
33
L.F.O. Filter
EFFECT
Low Pass Filter
High Pass Filter
Delay
Reverb
Flanger
Phaser
Vocoder
SELECT
Pitch Shifter
Echo Reverb
Filtered Echo
Flanger Echo
TIME
31
30
FX CUE
REF.
FX SEND
FX INPUT PARAMETER
27
28
10
TAP
D W
R E
Y T
25
FX LAUNCH
23
13