Inhaltsverzeichnis
Werbung
Verfügbare Sprachen
Verfügbare Sprachen
Before turning on
Execute all connections before connecting the device to power supply:
1. Power off the car engine.
2. Insert memory card into appropriate slot.
Please note: the device supports memory card capacity of 512 MB - 32 GB, class 6
and higher.
3. Fasten the device instead of the original rear view mirror of car. Use the included
rubber bands to install the device on the car rearview mirror.
4. Connect the mirror to power supply: connect the car charger into cigarette lighter
socket and connect to mini USB port on the device.
Note: it is suggested to route car charger cable along the edge of the windscreen.
5. Start the engine to check if the DVR has been installed correctly.
OPERatiON
Turn device on/off
To turn on/off the device, press and hold the power button. Note: after power on,
the device will start recording automatically (if the option "Boot video" is enabled in
Settings, and the memory card has been installed).
To go to standby mode, press power button. To wake up the device, press the power
button again.
Menu
To enter Settings, press the Menu button. To navigate through menu, press the UP/
DOWN buttons. Press OK button to confirm.
Operation modes
1. Press MODE button to change between modes: camera/photo/playback.
2. In order not to overwrite a file or protect it from accidental deletion, press the
MENU button while recording to lock the current recording.
UP button
1. Press to go to previous option.
2. Change between display modes: front camera/rear camera/picture in picture/2
channels.
3. Fast backwards: press and hold UP button in playback to fast backward the
recording.
4. During playback, press to increase volume.
DOWN button
1. Press to go to next option.
2. To turn on/off voice recording while recording video file, press DOWN button.
3. Fast forward: press and hold DOWN button in playback to fast backward the
User's manual
EN
13
Werbung
Inhaltsverzeichnis
