Avacom NAPB-A070-012 Bedienungsanleitung Seite 6

CHARGER FEATURES
Intelligent charging modes.
ź
ź The built-in microprocessor that continuously monitors a battery condition and automatically provides
the optimum voltage and the current to the charged battery.
The memory function that keeps the charger in the mode which was set the last time.
ź
ź The regeneration mode for a deeply discharged battery.
Several charging modes ensure the economical charging according an actual battery status and
ź
battery type. When the battery is fully charged the charger will switch to the maintenance charging
mode.
Compact size and light weight.
ź
CHARGERS SAFETY FEATURES
ź Electronic protection does not allow damaging the charger in case of short circuit or excessive load.
The battery protection prevents damaging of charger and battery, if positive and negative poles were
ź
connected incorrectly.
The protection which prevents damage to sensitive electronic components.
ź
Thermal protection which prevents damage of charger in the case of excessive temperatures during
ź
the charging process.
IP65 protection prevents intrusion of dust and water into the charger.
ź
DESCRIPTION OF LED INDICATORS AND BUTTONS
1 2 3 4 5 6
!
POWER BOOST
8 9 10
1 LED charge level indicator. LED indicator lit up - battery capacity is 0% - 25%.
2 LED charge level indicator. LED indicator lit up - battery capacity is 25% - 50 %.
3 LED charge level indicator. LED indicator lit up - battery capacity is 50% and above.
4 LED charge level indicator. LED indicator lit up - battery capacity is fully charged.
5 ! LED indicator of short circuit. LED indicator lit up - electric circuit is shorted.
7 12
MODE
BATTERY CHARGER
12V - 7A
11
2
6 LED indicator of reversed terminals. LED indicator lit up - terminals are reversed.
7 LED indicator of damaged batteries. LED indicator lit up - battery is damaged.
POWER
8 LED power indicator. LED indicator lit up - charger is plugged in.
Summer mode. The maximum voltage 14.4V - 7A. Suitable for charging 12V lead-acid
9
batteries at normal temperatures.
Winter mode. The maximum voltage 14.7V - 7A. Suitable for charging 12V lead-acid
10
batteries at low temperatures. Recommended for AGM batteries.
Turbo mode. The maximum voltage 16V - 7A. Suitable for charging 12V lead-acid batteries containing
11
calcium and charging for deeply discharged batteries, which is caused by acid stratification.
12 Button for setting charging modes.
CHARGING
ź First, make sure the voltage of lead acid batteries you want to charge is 12V.
Disconnect the battery from its operational load. If the battery is installed in the vehicle, turn the ignition
ź
off as well as other devices connected to the battery. Follow the safety instructions of the vehicle
manufacturer. Modern vehicles are equipped by sensitive electronic components and controls that can
be damaged if you don't strictly follow the instructions of the vehicle manufacturer.
ź Plug the charger into the electrical outlet (220V - 240V ~50Hz/60Hz).
Connect the red clip to the positive (+) terminal of the battery. Connect the black clip to the negative (-)
ź
terminal of the battery.
ź If the electric circuit is shorted the LED indicator
ź If positive and negative terminals are reversed the LED indicator
ź If the battery is damaged the LED indicator
The charger has a memory function. After connecting to the outlet it's in the mode that was set the last
ź
time.
Now you can now select the operating mode by pressing the button
ź
OPERATING MODES
SUMMER MODE (MAXIMUM CHARGING VOLTAGE 14.4V ± 0.25V, 7A).
ź This mode is suitable for lead-acid and gel batteries with a capacity above of 14Ah at normal ambient
temperatures environment.
To select this mode, press down the button
ź
indicator lit up the charger will automatically start charging.
When the battery is fully charged, the LED indicator
ź
switch to the maintenance charge mode.
WINTER MODE (MAXIMUM CHARGING VOLTAGE 14.7V ± 0.25V, 7A).
ź This mode is suitable for AGM batteries and gel batteries with a capacity above 14Ah at low ambient
temperatures.
To select this mode, press down the button
ź
indicator lit up the charger will automatically start charging.
!
will light up.
will light up.
will light up.
, see below.
until the LED indicator lights up. After the
will light up and the charger will automatically
until the LED indicator lights up. After the
3