3.4
Areas of Application
The Diaphragm Pump is intended for:
Pumping and compressing neutral and aggressive gases and vapours.
Generating a vacuum down to an ultimate pressure < 8 mbar.
Use in physical and chemical laboratories in trade and industry.
Use for vacuum filtration, vacuum distillation and vacuum drying, and other vacuum tech-
nology applications.
3.5
Pump head circuitry
Two-stage:
3.6
Materials of the medium-affecting pump parts
Seal
Screw fitting / Connecting elements
Valve
Diaphragm
Vacuum hose
Connection head / Pump head
*)
electrically conductive (with manufacturer's certificate of electrical conductivity)
Material resistance to aggressive media see: Publisher Hoppenstedt Publishing (18. September 2007)
3.7
Scope of Delivery
The scope of delivery is specified in the supply contract.
RE3011C
Component
Both pump heads are connected in series.
Chemical model - RE3011C
(resistant to aggressive gases)
EPDM
PVDF, PP
PEEK
Elastomer + PTFE Layer
PTFE
PTFE with carbon-fibre reinforcing *)
Description
9