Program Setting; Weee-Reference Of Disposal - Rev Ritter Emp701Mt Bedienungsanleitung

GB

7. Program setting

1. Once the spike has been connected to the mains, turn the dial clockwise
until the arrow indicates the current time on the dial
2. Due to transport requirements, all pins on the timer are pressed down
upon delivery. Before programming make sure that all the pins are in the
top position.
3. Press down all pins within the period in which the spike should be enabled.
Each pin corresponds to a period of 30 minutes.
Example: To activate the earth spike from 10 pm to 2 am, press
down all the pins in the time range between 10 pm and
2 am. (See images below)
2 4
The current time is 9 pm.
10
8. Cleaning
Attention! Risk of electric shock.
Before any cleaning work, disconnect the device from the mains supply.
• Clean the earth spike it with a slightly damp cloth.
• Do not use abrasive or chemical means, so as not to damage the surface.

9. WEEE-reference of disposal

In accordance with European defaults used electrical and electronics
devices may no more be given to the unsorted waste. The symbol of
the waste bin on wheels refers to the necessity of separate collection.
Please help with environmental protection and see to it that this
device is given to the for this purpose designated systems of
waste sorting if you do not use it any longer. DIRECTIVE 2012/19/EU of the
EUROPEAN PARLIAMENT AND OF the COUNCIL of 4 July 2012 on waste
electrical and electronic equipment (WEEE).
GB
11