Example Of Connecting To Other Equipment - Tascam US-16x08 Bedienungsanleitung

Example of connecting to other equipment

Vocal mic
CAUTION
• Before making connections, turn this unit and all equipment to be connected off (standby).
• The phantom power switches are used in groups of four channels. Do not set the phantom power to +48 when connecting a mic that
does not require phantom power.
• Do not connect or disconnect mics while phantom power is set to +48. Doing so could cause a loud noise and might damage this unit
and connected equipment.
• Set the LINE OUT and PHONES knobs to their minimum values before switching the phantom power +48/OFF switch. Failure to do
so could cause a sudden loud noise to be generated from the monitoring equipment, and this could damage the equipment or harm
hearing.
• Supplying phantom power to some ribbon mics will break them. If you are unsure, do not supply phantom power to a ribbon mic.
12
TASCAM US-16x08
Drums
Keyboard
USB
Drum machine
Computer
Guitar
Bass Guitar
Headphones
Tone generator module
Powered speakers, or
amplifier and speakers