Gitzo systematic 3 Serie Bedienungsanleitung Seite 9

FIG. 7 – Customize the tripod - mount accessories
Only for geared column:
Ensure winding handle is nearest to the narrow slot on the collar of the tripod.
How to lock and unlock the handle.
FIG. 8 – Customize the tripod - removing accessories
Press safety button "E" in order to remove the accessory.
FIG. 9 – Mounting and removing a camera head
Series 3 and 4
Tighten the screw against the base of the head, using the key supplied with
the tripod.
Series 5 only
Move the screw "F" against the base of the head using the key supplied with
the tripod and then tighten it.
FIG. 10 – Maintenance
The internal thread of the leg locks can be cleaned and greased to perform
optimally. Turn the twist lock until the thread is exposed, and remove any
dust or sand with a cloth. Apply a small amount of grease (sold separately:
GSGREASE02) onto the thread, and turn the twist lock until it is locked.
In addition to reading these instructions, it is also important to read the
general instructions printed on the warranty card packed with your product.