Gitzo monopod Serie Bedienungsanleitung Seite 6

English
FIG. 1 – Extending the legs
Turn all the twist locks of each leg 1/4 of a turn at the
same time, then pull the leg down and tighten the twists
individually.
FIG. 2 – Reversible 3/8" or 1/4" fixing screw
FIG. 3A – Replaceable foot
In case the foot becomes worn, it can be replaced easily
with a new foot (available as a spare part).
FIG. 3B – Interchangeable foot
Interchangeable with Gitzo universal accessories such
as the big foot, long spike, etc.
FIG. 4 – Maintenance
The internal thread of the leg locks can be cleaned and
greased to perform optimally. Turn the twist lock until the
thread is exposed, and remove any dust or sand with a
cloth. Apply a small amount of grease (sold separately:
GSGREASE02) onto the thread, and turn the twist lock
until it is locked.
In addition to reading these instructions, it is also
important to read the general instructions printed on the
warranty card packed with your product.