Safe Test Lead Connections - Tektronix DMM912 Bedienungsanleitung

Safe test lead connections

To safely disconnect the test leads from the meter, first
disconnect all test leads from the circuit being tested, then
disconnect the leads from the input connectors.
WARNING.
insert unnecessary test leads or metal pins into
the A mA and A connectors. Voltages applied to
the COM connector may be present at all other
input connectors.
Only use the test leads supplied or recommended
(or their equivalent) with the meter. Refer to
Accessories on page 1–45.
DMM912/914/916
To prevent electrical shock, do not
1–21