Rotel ICECUBEMAKER9902CH Gebrauchsanweisung Seite 30

Problem
The compressor works
abnormally with a buzzing
noise
Water shortage indicator
light is on
Indicator lights on display
are not on
The ice cubes are too big
and pieces stick together.
Conditions for the ice
making cycle are correct
but no ice is coming out.
The lights indicating ICE
FULL and ADD WATER come
on at the same time.
• DISPOSAL
For proper disposal, the unit is to return to the dealer, the service agent or the
o
company Rotel AG.
Gebrauchsanweisung ○ Mode d'emploi ○ Istruzioni per l'uso ○ Instruction for use
Possible Cause
The voltage is lower
than
recommended
1. The water reservoir is
empty
2.The pump is full of air
Blown fuse/ No power
The temperature of the
water in the water
reservoir or the
ambient temperature is
too low
Refrigerant leaks /
Sealed system is
blocked
Water tray is blocked by
ice cubes
30
Suggested Solutions
Stop the ice maker and do not restart
until the voltage is normal.
1. Press the stop button, fill with water,
wait 3 minutes and press the start
button to restart. When the water has
reached the fill line, the ice maker will
restart automatically.
2. Open the drain cap, and let several
drops of water drain out.
Replace fuse / Turn power on
Stop the machine and reset the ice
making cycle. Restart the machine after
turning it off.
Call for service
Clear the ice cubes under the ice shovel
to pull out the plug and insert it again
then press the "START" button, two
minutes later the machine will restart
automatically