auna Amp4 BT Bedienungsanleitung Seite 15

1 Blue LED Output Level Indicators
2 Blue LED Display Window for MP3/BT Function
3 Buttons for BT/MP3(USB and SD) Function Control
MODE Button: For audio selection like BT/USB/SD/LINE IN
-PLAY/PAUSE Button: For play and pause control
-Prev,/Next: For quick backward or next song
4 Main Power on Switch
The amplifier is switched ON or OFF by using this switch.
5 USB Charge Port & USB Reader Function
USB port charges for smartphone, and also for USB reader function.
6 SD/MMC Socket for playing SD/MMC cards
7 AUX IN
Line Input. AUX/ CD IN
Lets you easily connect the computerized MP3 Device
( player) sources, such as PC( CD ROM) , laptop,walkman, iPod, and cell
phone.
8 1/4" phone jack
Accepts headphones with 6.3 mm (1/4") plug
9 TREBLE TONE CONTROL
Lets you boost or attenuate treble for the desired sound.
10 BASS TONE CONTROL
Lets you boost or attenuate bass for the desired sound
11 Master Volume Control
Lets you adjust the overall sound level, turn the knob clockwise to
increase the volume.
12 BT antenna
The antenna is best receiving for BT operation
13 RCA L/R LINE Input
Let you connect to the desired LINE input sources.
14 Push Type Speaker L/ R Terminals
Let you easily connect the speakers' wires directly to the amplifier.
15 AC IN Power Cord
Connect to AC 230 V/ 50 Hz.
16 Fuse
The amplifier uses a fuse for protection against surges and short circuit.
If the amplifier suddenly turn off and will not turn on, check the fuse. If
necessary, replace it with a 1- amp, 250- volt, fast- acting, 5x20mm fuse
(not supplied).
EN
15