Operation - Royal Catering RCWS-30 Bedienungsanleitung

• If the current value is superior or equal to the set value, the thermostat stops
the heating.

OPERATION

1. The dishes placed inside the cup warmer trolley must be dry.
2. Turn the thermostat to the 0⁰ position.
3. Plug in the device. The control light POWER turns on.
4. Regulate the thermostat on the chosen value.
5. The orange light HEAT turns on, the heating element starts to heat and the tem-
perature in the cabin raises little by little.
6. As soon as the set temperature is reached, the orange light turns off and the
heating elements stops to heat.
7. As soon as the temperature in the cabin decreases, the thermostat reacts to it :
the orange light turns on again and the heating bar restarts to heat.
8. After use, reset the thermostat on zero.
9. Generally speaking, it is advisable to unplug the device while not used.
10. To clean the rest of the device, watch up to protect the electric parts from humi-
dity and from direct water contact to avoid electric shocks and shortcircuits. An
impregnated cloth is easily enough if you regularly clean the device.
11. If you don´t use the device for a longer time or stock it, check the humidity and
temperature conditions: the air has to be dry and the device should be covered
to be protected from dust deposits.
REGULAR CONTROL OF THE DEVICE
Control regularly that the device doesn´t present any damage. If it should be the case,
please contact your customer service to solve the problem.
What to do in case of problem?
Please contact your customer service and join following information:
• Invoice number and serial number (the latest is to be found on the technical
plate on the device)
• If relevant, a picture of the damaged, broken or defective part
• It will be easier for your customer service clerk to determinate the source of
the problem if you make a detailed and precise description of the matter. A void
formulations like "the device doesn´t heat", which may mean that it doesn´t heat
enough or even not at all. Though, those two possibilities have a different causati-
on!
• Still indicate the performance of the lights to facilitate the diagnosis: Does the
green light get on when you turn on the device? Does the orange light turn on
when you set the temperature?
10
• Check with a thermometer that the device measures the temperature within
the cabin properly. (Caution: do not set the thermostat on a value exceeding the
maximal value of your thermometer!)
The more detailed your information, the quicker the customer service will be able to
answer your problem rapidly and efficiently!
CAUTION: Never open the device without the authorization of your customer ser-
vice. This can lead to a loss of warranty!
11