Starting Position; 1Work Stages - Duplex TURBO Betriebs- Und Wartungshandbuch

6.7.1 Work stages
Procedure:
1) From the starting position, move forward towards the corner as indicated in the figure.
2) Once you have reached the corner, turn the machine around and move onto the second
strip to wash, slightly overlapping the area that you have cleaned before.
3) Repeat this operation until you have finished cleaning the floor.
4) Clean the outer edge on the opposite side of the cleaning area, reversing the appliance.
Position
Squeegee
Rev.
1.0

Starting position

111
DUPLEX TURBO
OPERATION AND USE
F.44