Vigan Z6V1 Bedienungsanleitung Seite 42

INSTRUCTIONS
General instructions and recommendations:
This device can be operated both cord and cordless.
CAUTION!
If the device gets blocked during the operation, turn the device off immediately and fix the
problem.
The hair trimmer turns on/off by the button (number 8). Before turning the device on, make
sure that all the attachments/combs are properly installed and the trimmer is ready to use.
It is highly recommended to lubricate the blades before first use.
The trimmer is designed for cutting dry hair. We do not recommend cutting wet/washed hair.
Before trimming your hair, we recommend to comb your hair in the direction of growth.
The best trimming results will be achieved by moving the device slowly against the direction
of hair growth.
Trimming with guide combs
The set includes 4 guide combs with different cut lengths.
1) Choose one of two trimming heads and make sure that it is properly installed.
2) Pick one of the guide combs and install it. Then you can turn the trimmer on.
Remark: The small trimming head can be used with the adjustable guide comb (f).
The length can be adjusted from 4 - 5,5 mm.
3) We recommend to start the trimming with guide comb that has longer cut in order to avoid
cutting the hair too short. When you get familiar with the device, you can pick directly the
comb that you already know.
4) Make sure that the comb is during the trimming in contact with your scalp. This method
will provide best results.
5) For reaching the best results move the trimmer slowly over your head.
6) Move the trimmer against the hair growth direction.
7) Make sure that you trim every spot at least once.
8) When the trimming is done, turn of the hair trimmer and remove the guide comb.
Clean the rest of the hair from the trimmer by blowing or brushing.
42
str