Description Of The Symbols - Blaupunkt HKSK 750201 Bedienungsanleitung

DESCRIPTION OF THE SYMBOLS

This symbol, marking a point of safety, indicates a caution, warning or danger. Ignoring this warning can result in an
!
accident to yourself or others. To limit the risks of injury, fire or electrocution, always follow the recommendations
indicated.
Warning – To reduce the risk of injury, user must read instruction manual. Read the instruction handbook and follow all
warnings and safety instructions.
Conforms to European standards.
Class II: This machine is designed with double insulation
These symbols indicates the requirement of wearing ear protection, eye protection, respirator and gloves when using
the product.
Remove plug from the mains immediately if cable is damaged or cut.
Do not expose to rain.
Keep bystanders away.
Recycle unwanted materials instead of disposing of them as waste. All tools, hoses and packaging should be sorted,
taken to the local recycling center and disposed of in an environmentally safe way.
TECHNICAL SPECIFICATIONS
Voltage
Power
No load speed
Max cut lenght
Net weight
Sound pressure level lpA
Sound pressure level lwA
Vibration
Noise/Vibration information
Measured sound values determined according to EN 60745. Vibration total values (triax vector sum) determined according to EN
60745.
The vibration emission level given in this information sheet has been measured in accordance with a standardized test given in EN
60745 and may be used to compare one tool with another. It may be used for a preliminary assessment of exposure.
The declared vibration emission level represents the main applications of the tool. However if the tool is used for different
applications, with different accessories or poorly maintained, the vibration emission may differ. This may signi¬ficantly increase the
exposure level over the total working period.
An estimation of the level of exposure to vibration should also take into account the times when the tool is switched off or when it
is running but not actually doing the job. This may signifi¬cantly reduce the exposure level over the total working period.
Identify additional safety measures to protect the operator from the effects of vibration such as: maintain the tool and the accesso-
ries, keep the hands warm, take regular breaks.
230V -240V ~ 50Hz
600W
3000 rpm
600 mm
3.2 Kg
90 dB(A) K=3 dB(A)
100 dB(A) K=3 dB(A)
2.32 m/s2, K = 1,5 m/s2