Intended Use; Operation - Blaupunkt HKSK 750201 Bedienungsanleitung

INTENDED USE

Cutting and trimming of hedges, bushes and ornamental shrubs in the domestic sector only. All other uses are expressly excluded.
Tools for private and hobby gardens are not suitable for use in public facilities, parks, along roadways, on farms or in the forestry
sector.
LIST OF MAIN PARTS
1

OPERATION

Using the retaining catcher (6):
• The handle is equipped with a retaining catcher which allows a better fixation of the extension cord.
• Caution: The operation must be done when the hedge trimmer is not running.
Starting:
• Remove the blade protector before using the hedge trimmer.
• Press the rear handle trigger (7) on the main handle and the front handle switch (5), you can then start work.
Stop:
• Release the front handle switch (5) or the rear handle trigger (7) on the main handle, you can stop it.
Working with the hedge trimmer
Hold the hedge trimmer with both hands and keep it a safe distance away from your body. Ensure that you always maintain a stable
position. Pass the extension cable over your shoulder and pay attention that it always stays behind you while you are working.
Never pass the cable over the hedge; it is likely to be caught by the blades. It is possible to cut branches up to a maximum thickness
of 16 mm. In order to approach branches with the blades, move the hedge trimmer forwards straight along the line of the cut. Cut
the sides of the hedge first, then the top. In order to obtain a perfect shape, we recommend you cut upwards in the direction of the
growth. If you cut from top to bottom, the thinner branches will move outwards leaving holes or less bushy places.
In order to cut the top in a straight line, stretch a wire along the entire length of the hedge at the desired height.
Take care not to cut foreign objects such as metal wires, latticework which would be likely to damage the blades or the drive.
If the blades are jammed or blocked by an obstacle, switch off the appliance immediately and unplug it, and only then can you
intervene to free the appliance.
5
4
3
2
9
1. Blade tripper
2. Blade
3. Guard
7
4. Front handle
6
5. Front handle switch
8
6. Retaining catcher
7. Rear handle trigger
8. Housing
9. Cable