Kemar KSB-300 Gebrauchsanleitung Seite 45

DESCRIPTION AND FUNCTION OF THE PARTS
LID 2-PARTS
The two-piece lid can be easily put on, remove and clean. Always use the lid and the cap in
the lid when the appliance is in operation.
Position the lid with the lid wings in the center between the spout and the handle on the
container. Press the lid onto the container until it clicks into place. The lid must always be
well secured during operation, especially when handling hot liquids that can cause scalding.
Be sure to place the lid with the tab just above the fill opening so that the container is locked
and the side tabs are snapped into place.
Never turn on the blender without first checking that the lid is firmly in
place.
Removing the lid: Hold the container firmly and lift the lid on one of the lid wings.
LOCK CAP IN THE LID
45
Insert the small cap into the lid and turn clockwise to secure
it. Remove the cap when using the plunger. Make sure the
small cap is firmly seated in the lid before turning on the
mixer.
DE
KSB-300