Important Safety Instructions; Important Safety Advice - Kemar KSB-300 Gebrauchsanleitung

INTEGRATED SAFETY FUNCTIONS
OVERHEATING PROTECTION
The motor of the Blender is equipped with a temperature control. If the motor or the blades turn too
slowly due to too solid foods or too littlle fluid, there is a danger of overheating. If the motor should
switch off for that reason, the overheating protection of the Blender is activated.
Let Blender cool off for about 45 minutes in a well-ventilated area, afterwards you can use the
Blender as usual.
Even before run-in water, the motor is safely protected.
AUTO STOPP FOR MIXING CONTAINER
The sensor for the mixing container recognizes if the container has been set up correctly.
If the container is not, or has not been placed correctly, the Blender will not turn on.
If the device is turned on and you remove the Container from the motor unit, the power turns o
immediately. If you put the container back, the unit switches to standby mode.

IMPORTANT SAFETY INSTRUCTIONS

Always follow the precautions in this section for safe handling of the unit. They
are used to protect against the risk of fire, electric shock, injury and property
damage:
35
This sign warns you of the risk of injuries.
This sign warns you of the risk of injuries due to
electricity.
This signs warns you of the risk of burns or scalding.
This sign marks addittonal information.
UK
KSB-300