Turn On / Off - NAYATI NGETL 5-50 Handbuch

• Turn ON / OFF Burner
- Turn Burner ON
a. Open the main gas valve.
b. Press the safety knob tap "A" and keep the knob pressed in.
c. Ignite the Pilot flame by using igniter gun.
d. After Pilot flame ignite, keep press knob "A" for 15 – 20 seconds.
e. Release the knob "A". Check whether the Pilot flame remains ignite. If it fails,
repeat the above steps (a, b, c, d, and e).
f. Turn the gas valve handle "A" anticlockwise to desired position.
- Turn Burner OFF
a. To extinguish the flame temporary, turn the gas valve clockwise.
b. To extinguish all flames, turn the gas valve to "O" position. The Main gas valve must be
closed.
ORIENTAL
Manual Instructions for Gas Economic Table Low
22