Fm Radio; Listening To Fm Radio; Changing The Fm Radio Station; Changing The Scan Settings For Fm Radio - PURE Evoke H6 Benutzerhandbuch

FM radio

Listening to FM radio

To listen to FM radio:
• Press until 'FM' is displayed.
Source

Changing the FM radio station

To change the FM radio station:
• To scan to the previous or next radio station, turn the Select dial left or right and then press the
Select dial.
Select
To manually tune to a radio station, turn the Select dial left or right.
•
The frequency steps up or down by 0.05 MHz.
Select

Changing the scan settings for FM radio

When you scan for FM radio stations, you can include all radio stations or only those with a strong signal.
To change scan settings for FM radio:
1. Press Menu .
2. Turn and press the Select dial to choose 'Scan Setting'.
3. Turn and press the Select dial to choose 'Strong Stations Only' or 'All Stations'.

Choosing stereo or mono reception for FM radio

By default, your Evoke H6 uses stereo reception for FM radio. If your FM radio stations have a weak signal,
try using mono reception to improve the signal strength.
To choose stereo or mono reception:
1. Press Menu .
2. Turn and press the Select dial to choose 'Stereo'.
3. Turn and press the Select dial to choose 'FM Stereo' or 'Forced Mono'.
Select
>
EN
9