Setting up the Sunshade
M
6. Setting up the Sunshade
➤
Fig.1 Screw the the clamp to the tube,
using a Phillips screwdriver.
Positioning
arrows
Note:
Adjust the bottom pole in the clamp
so that the arrows are aligned and fasten
the holder to the pipe by tightening the
screw with a Phillips screwdriver.
➤
Fig.2 Screw the stopper to the tube,
using a Phillips screwdriver.
➤
Fig.3 Slide the swivel foot into the bottom pole
(the release button has to be pulled out).
Once the swivel foot is in place, turn the release
button to lock the swivel foot in place.
1
2
Fig.1
Fig.2
Fig.3