Nowsonic AUTARK LED MASTER II Bedienungsanleitung Seite 11

www.nowsonic.com
Now you can choose between the following control options:
Manual control
In this mode you can manually set the desired color mixtures with the
R, G, B W/D
and faders.
NOTE: M1
In the channel mode (
effect.
Internal color mixtures
As an alternative, you can choose between the internal color mixtures
of the Master via the MIX
LED II
on the top panel next to the fader.
W/D
R GB ), the fader has no
fader. The color mixtures are printed
Nowsonic Autark LED Master II
Internal programs
MAC
Via the fader you can choose between the 8 internal programs of
the Master . Depending on your selection, the following effects
LED II
are triggered via the corresponding channel values:
Program Channel value
MAC 1 8–38
MAC 2 39–69
MAC 3 70–100
101–131
MAC 4
MAC 5 132–162
MAC 6 163–193
MAC 7 194–224
225–25
MAC 8
By pressing the RUN MODE
AUTO and the SOUND mode for automatically changing the effect.
In AUTO mode, the programs are changed automatically with the
d d
speed which is set with the
30 seconds.
SOUND
In mode, the programs are dynamically changed depen-
d d
ding on the music sensitivity which is set with the Sound Sensiti-
vity fader. If the programs are not changed as expected, increase
or decrease the music sensitivity as needed.
11
User manual
Effect
Color fading red – green
Color fading red – blue
Color fading green – blue
Color fading red – green – blue
Chasing red – green
Chasing red – blue
Chasing green – blue
Chasing red – green – blue
button you can toggle between the
SPEED
fader in the range from 0.1 to
GB