Sabre 1340GR Betriebsanleitung Seite 73

ENG 18
move the lever as per the indications on the label.
WARNING!
!
stopped.
➤
For hydrostatic drive models:
4.31 B
RAKE PEDAL
This pedal works the brake on the rear wheels.
4.32 D
RIVE ENGAGEMENT PEDAL
This pedal engages drive in the wheels as well as modulating the machine's
forward and reverse speeds.
– To engage forward drive just press it in the «F» direction with your toe-cap,
noting that increasing the pres-
sure on the pedal progressively
increases the speed of the
machine
– Reverse is engaged by pressing
the pedal with the heel, in the
«R» direction.
– The pedal automatically goes
into neutral «N» when released.
– The neutral condition «N» is
shown by the lighting of a pilot
lamp (4.7.h).
WARNING!
!
only be engaged when the
machine is stopped.
NOTE
pedal is used, whether forwards
or for reverse, when the parking
brake (4.5) is engaged, the engi-
ne stops. .
Reverse must only be engaged when the machine is
Reverse must
If the drive
CONTROLS AND INSTRUMENTS
4.32
N
R
4.33
4.31
F
B
A