Sabre 1340GR Betriebsanleitung Seite 72

CONTROLS AND INSTRUMENTS
4.10 C
UTTING HEIGHT ADJUSTING LEVER
There are seven positions for this lever, shown as «1» to «7» on the label, which
correspond to various heights of between 3 and 9 cm.
– To go from one height to another, press the release button at the end of the
lever.
4.11 L
EVER FOR TIPPING THE GRASS
This lever, when pulled out from its hole, is to tip the grass-catcher to empty it and
reduce the effort required by the operator.
➤
For mechanical drive models:
4.21 C
LUTCH
This pedal has a double function - during the first part of its travel it acts as a
clutch, engaging and disengaging drive to the wheels, and in the second part it
acts as a brake on the rear wheels
IMPORTANT
this can cause overheating and
damage the transmission belt.
NOTE
machine is in movement, keep
your foot off the pedal.
4.22 S
PEED CHANGE LEVER
This lever has seven positions for
the 5 forward speeds, the neutral
position «N», and reverse «R».
To go from one speed to another,
press the pedal (4.21) half way and
/
BRAKE PEDAL
It is important not to take too long in using the clutch as
When the
-
CATCHER
4.21
4.22
N
1 2 3
R
ENG 17
4 5