Nowsonic Ampix Bedienungsanleitung Seite 5

Ampix
GB
User manual
Back panel
DC 12-18 V
1 2
1) Mains (12-18V DC 150 mA): Connect the supplied power adapter
here to power the unit.
2) Stereo/Mono switch: Select the „Stereo" setting to route a stereo
signal to the headphone outputs. Select the „Mono" setting to
route a monophonic signal to the headphone outputs.
3) 1/8" mini jack: Use this TRS stereo jack to connect an external audio
source. The signal of the audio source is thereby routed to all four
headphone outputs.
3 4 5
4) 1/4" jack: Use this TRS stereo jack to connect an external audio
source. The signal of the audio source is thereby routed to all four
headphone outputs.
5) RCA inputs: Use both mono jacks to connect an external audio
source. The signal of the audio source is thereby routed to all four
headphone outputs.
Note: If you connect multiple audio sources to more than
one input, the signals are summed and routed to all four
headphone outputs.
6
www.nowsonic.com