Ironing Without Steam; Ironing With Steam; Steam Jet Function - HOYER Handel DB 1750 C3 Bedienungsanleitung

6.4 Ironing without steam

Sensitive fabrics are ironed at lower temper-
atures and without steam. In order to damp-
en them, the spray function is available.
1. Set the steam control 3 to
temperature control 13 to MIN.
2. Fill the water tank 10 if you wish to use
the spray function.
3. Place the steam iron on the base unit 9.
4. Connect the mains plug 8 with the wall
socket.
5. Set the desired temperature using the
temperature controller 13. The tempera-
ture control lamp 11 lights up.
6. Start ironing as soon as the ironing tem-
perature has been reached and the tem-
perature control lamp 11 goes out.
7. Finish ironing, set the temperature con-
troller 13 to MIN and pull out the
mains plug 8.
8. Allow the steam iron to cool down, and
pour off any remaining water from the
water tank 10 through the filling open-
ing in the water tank (under the lid 2).

6.5 Ironing with steam

Steam ironing requires a high temperature,
at least the temperature setting for
der to additionally dampen items of cloth-
ing, the spray function is also available.
1. Set the steam control 3 to
temperature control 13 to MIN.
2. Fill the water tank 10.
3. Place the steam iron on the base unit 9.
4. Connect the mains plug 8 with the wall
socket.
5. Set the temperature controller 13 to the
desired temperature (at least
temperature control lamp 11 lights up.
6. Once the ironing temperature has been
reached and the temperature control
lamp 11 goes out, set the steam con-
trol 3 to and start ironing.
The steam will ...
... start to come out as soon as you hold
the steam iron horizontal, and
... stop as soon as:
- you hold the steam iron vertically,
- you place the steam iron on the base
and the
unit 9,
- the temperature is too low,
- the water tank 10 is empty
or
- Set the steam control 3 to
7. Finish ironing, set the temperature con-
trol 13 to MIN, the steam control 3 to
, and pull out the mains plug 8.
8. Allow the steam iron to cool down, and
pour off any remaining water from the
water tank 10 through the filling open-
ing in the water tank (under the lid 2).

6.6 Steam jet function

The steam jet function requires a high tem-
perature. Select a temperature setting be-
tween and MAX. For this purpose, the
water tank 10 must be at least one quarter
full. The steam control 3 is set to the symbol
.
• Press the steam jet button 5
steam iron glides over the item of laun-
. In or-
dry.
• Wait a few seconds before you press
the steam jet button 5
and the
NOTE:
• For smoothing items of clothing that are
hanging up, you can use the steam jet
Button in a vertical position.
). The
.
while the
again.
9
GB