Kapitel 2: Verbindung Zum Computer/ Smartphone/ Pos; Usb-Kabelgestützte Übertragung; Bluetooth-Datenübertragung; Bluetooth Mode(Hid) - Inateck Bcst-70 Bedienungsanleitung

Kapitel 2: Verbindung zum Computer/ Smartphone/ POS

2.1. USB-Kabelgestützte Übertragung
Gemäß den USB-HID-Normen gewährleistet der Inateck BCST-70 eine fast
verzögerungsfreie Datenübertragung bei USB-Kabelanbindung. Bei Anbindung über das
USB-Kabel wird die kabelgebundene Datenübertragung priorisiert.
2.2. Bluetooth-Datenübertragung

2.2.1 Bluetooth Mode(HID)

1. Power on Inateck BCST -70 by toggling switch from OFF to ON.
2. Scan "Enter Setup" barcode and then "Bluetooth Pairing", BCST-70 will enter Bluetooth
pairing status.
Enter Setup
3. Enable the Bluetooth of the device to be connected, e.g. PC, cellphone or tablet. You
can do that like below.
Windows XP: Click Control Panel->Printers and Other Hardware->Add Bluetooth Device
Windows 7/8/8.1: Click Control Panel->Add Devices
Windows 10: Click Setting->Devices->Bluetooth
macOS:Click System Preference->Bluetooth
iOS: Click Setting->Bluetooth
android: Clik Setting->Bluetooth
Enable the Bluetooth on host device and it will automatically search for BCST-70. After
a few seconds 'BCST-70******' will appear in the list of available devices. Pair the two
devices. A chords sound means successful pairing.
4. Open a file on computer and move cursor to the blank where scanning output should
be placed. Scanning results can be displayed on computer then.
Note: Normally BCST-70 can re-connect to previously connected device automatically. If
it fails, please remove the paring history of BCST-70 in the list of host device. Afterwards,
pair them again.
30
Bluetooth Pairing