Changing The Atomizer Head - uwell WHIRL TANK Bedienungsanleitung

UWELL Whirl – Using the Device

Changing the Atomizer Head

1. Disconnect the clearomizer from the battery/box mod of your
e-cigarette.
2. Turn it so that the mouthpiece points to the floor. Remove the
atomizer head base with Airflow Control by turning counterclockwise
from the glass tank of the unit.
3. Remove the old atomizer head by pulling it out and replace it by a
new one. The red o-rings must still be properly seated to prevent
leakage of e-liquid.
4. Finally, reconnect all parts
and make sure no e-liquid can
escape. Screw the clearomizer
back to the battery and give the
new vaporizer head plenty of
time to absorb e-liquid.
Please also note the operating
instructions on page 44.
46