Denon Professional DN-350UI Benutzerhandbuch Seite 6

Setup
Important: Connect all cables securely and properly (with stereo cables: left with left, right with right), and
do not bundle them with the power cable.
1. Use XLR cables, a stereo RCA cable, a digital coaxial cable, or a digital optical TOSLINK cable to
connect the Outputs (Analog or Digital) to the inputs of your external receiver, amp, powered
monitors, etc.
2. Connect the FM Antenna on the back of the unit, if needed.
3. After completing all the connections, use the included power cable to connect the AC Input to a
power outlet.
4. Power on DN-350UI.
5. To connect DN-350UI to a network, turn the Jog Dial to select System Settings from the main
menu, and then choose Internet Setup. Use the Wizard to automatically search for and connect to
local networks. To manually configure network settings, choose Manual Settings. For wired network
connections, make sure DN-350UI is connected to your network switch or router by Ethernet cable
from the Ethernet port.
Example
Powered Monitors
Receiver
Items not listed under
6
FM Antenna
Introduction > Box Contents
USB Flash
Drive
Bluetooth Device
are sold separately.
Power
Router