Denon Professional DN-350UI Benutzerhandbuch Seite 12

Troubleshooting
If you encounter a problem, try doing these things first:
• Make sure all cables and other connected devices are properly and securely connected.
• Make sure you are using DN-350UI as described in this user guide.
• Make sure your other devices or media are working properly.
• If you believe DN-350UI is not working properly, check the following table for your problem and
solution.
Problem:
Power does not turn on.
DN-350UI does not
produce any sound, or
the sound is distorted.
Audio from my Bluetooth
device does not play
through DN-350UI.
Pairing my Bluetooth
device to DN-350UI
requires a PIN.
Using the radio produces
noise.
12
Solution:
Make sure DN-350UI's power input is properly
connected to a power outlet using the included power
cable.
Make sure all cable and device connections are secure
and correct.
Make sure none of the cables are damaged.
Make sure the settings on your Bluetooth device,
loudspeaker, mixer, etc. are correct.
Make sure you have properly paired your Bluetooth
device.
Improve the Bluetooth signal reception by moving your
Bluetooth device closer to DN-350UI. Also, remove
obstacles (walls, furniture, etc.) so there is a clear line
of sight between your Bluetooth device and DN-350UI.
Enter 0000 as the PIN. (Some older Bluetooth devices
may require you to enter a PIN.)
Make sure the antenna is properly connected.
Change the position or orientation of the antenna.
Use an outdoor FM antenna.
Move other cables away from the antenna.
Please see:
Setup
Setup
Setup,
Operation
Operation
Operation