Internet Setup; Factory Reset; Software Info; Software Update - Denon Professional DN-350UI Benutzerhandbuch

System Settings
Select System Settings to access the following sub-menu options.

Internet Setup

Select this option to configure and view your network settings.
• Wizard: Select this option to automatically search for and connect to available networks. If the
network is password protected, you will be prompted to enter it using the Jog Dial. If the unit fails to
connect to the selected network, it will return to the Select Network page.
• View Settings: Select this option to view current network settings.
o Active adapter: Displays whether the unit is actively using a Wired or Wireless connection.
o MAC Address: Displays the current MAC Address.
o DHCP: Indicates whether DHCP is enabled or disabled. This setting can be changed by using the
Manual Settings option below.
o SSID: Displays the name of the current network.
o IP Settings: Select this option to view information for the IP Address, Subnet Mask, Gateway
Address, Primary DNS, and Secondary DNS settings.
o Wlan Region: Displays the current WLAN Region. This setting can be changed using the Wlan
Region option below.
• Wlan Region: Select this option to choose the WLAN Region for your area.
• Manual Settings: Select this option to manually set up a Wired or Wireless connection.
• Network Profile: Displays recently connect networks. Use the Jog Dial to select a network, and press
it to delete the network profile.

Factory Reset

Select this option to reset DN-350UI to its default settings.

Software Info

Select this option to view the unit's current MCU, BT, and FS versions.

Software Update

Select this option to check for software updates.
11