Set Display Brightness; Apply Factory Settings; Update Software; Check Software Version - Philips Fidelio B1 Benutzerhandbuch

Note
•
This product may not be compatible with certain types
of USB storage device.
•
If you use a USB extension cable, USB HUB, or USB
multi-reader, the USB storage device may not be
recognized.
•
Digital camera PTP and MTP protocols are not
supported.
•
Do not remove the USB storage device while it is
being read.
•
DRM-protected music files (MP3) are not supported.
•
Support a USB port: 5V

Set display brightness

You can press DIM repeatedly to select a
different brightness level of the display panel on
this product.
If you select AUTO OFF, LED message is
switched off after 10 seconds of button
inactivity.

Apply factory settings

In case of no response from this product , you
can reset this product to the default settings
programmed at the factory.
1
In HDMI ARC mode (press HDMI ARC),
on the remote control, within six seconds,
twice then Volume - once, and
press
then hold down BASS -.
» When the factory settings restore is
complete, the product automatically
switches off and restarts.
, 1A.

5 Update software

To get the best features and support, update
your product with the latest software.

Check software version

In HDMI ARC mode (press HDMI ARC), on
the remote control, within six seconds, press
twice then TREBLE - once, and then hold down
BASS -.
» The software version number is displayed
on the display panel.

Update software via USB

Caution
•
Do not turn off the power or remove the USB flash
drive when the software update is in progress because
you might damage this product.
1
Check the latest software version on
www.philips.com/support.
• Search for your model and click on
"Software and drivers".
2
Download the software into a USB flash
drive.
a Unzip the downloaded file, and make
sure that the unzipped file is named
"B1. bin".
b Put the "B1. bin" file in the root
directory.
3
Connect the USB flash drive to the USB
connector on this product.
4
Switch this product to HDMI ARC source
(press HDMI ARC).
EN 13