Crown CT10113 Originalbetriebsanleitung Seite 18

Symbol
Disconnect the power tool
from the mains before instal-
lation or adjustment�
Risk of damage to hidden
wiring or household service
lines�
Movement direction�
Rotation direction�
Locked�
Unlocked�
Prohibited�
Double insulation / protec-
tion class�
Attention� Important�
A sign certifying that the
product complies with es-
sential requirements of the
EU directives and harmo-
nized EU standards�
Wear protective gloves�
Useful information�
Torque
"Drilling"�
Stepless speed control�
Meaning
control position:
English
18
Symbol
Power tool designation
Electric drills are used for drilling in steel, wood and
ceramics�
The ability to adjust the speed and availability of the
reverse mode allows the power tool to be used as a
screwdriver�
The area of the tool application can be expanded due
to use of additional accessories�
There is a possibility of a stationary installation of the
tool by use of some special accessories�
Power tool components
1 Keyless chuck *
2 Torque regulator
3 Step speed selector switch
4 On / off switch
5 Rotational direction switch
6 Ventilation slots
7 Light-emitting diode (LED)
8 Screw *
9 Magnetic holder *
10 Screwdriver bit *
* Optional extra
Not all of the accessories illustrated or described
are included as standard delivery.
Installation and regulation of power tool
elements
Before carrying out any works on the power tool it
must be disconnected from the mains.
Do not draw up the fastening ele-
ments too tight to avoid damaging the
thread.
Mounting / replacement of accessories (see fig. 1)
With long-term use the drill bit may be-
come very warm; use gloves to remove
it.
Keyless chuck (see fig. 1)
• Open the jaws of the keyless chuck 1 - hold its rear
part with one hand and rotate its front part with the
other hand as it is shown in figure 1.
• Mount / replace the accessory�
• Tighten the keyless chuck 1 without skewing the ac-
cessory as it is shown in figure 1.
Meaning
Do not dispose of the power
tool in a domestic waste
container�