Kompernass KH 3300 Bedienungs- Und Sicherheitshinweise Seite 22

05) Press the MEMORY/CLK-ADJ button (9). The track is now stored in the first programmed position (P-01).
Repeat steps 3) - 5) for up to 20 tracks. You can also program a track several times.
The programmed track sequence is stored until you remove the CD from the CD compartment, choose another function or switch off the equipment.
START PROGRAMMED TRACK SEQUENCE
01) Press the MEMORY/CLK-ADJ button (9). The display (15) shows TRACK MEMORY and the programmed track.
02) Press the PLAY/PAUSE button (14) - to start playing the programmed track sequence.
03) Press the STOP button (11) twice to cancel a programmed track sequence.
REPEAT FUNCTIONS ( " REPEAT " ]
• To repeat all the tracks on a CD, press the M-UP/REPEAT button (7). The display (15) shows REPEAT.
• To repeat a single track on a CD, press the M-UP/REPEAT button (7) twice when the desired track is running. The display (15) flashes REPEAT.
• To repeat a programmed track sequence on a CD, press the M-UP/REPEAT button (7) when the programmed track sequence is running. The display (15) shows REPEAT.
• To switch off the Repeat function, press the M-UP/REPEAT button (7) repeatedly until the display (15) no longer shows REPEAT.
PLAY TRACKS IN RANDOM SEQUENCE [ " RANDOM " ]
The RANDOM function selects a random choice of tracks from the inserted CD.
01) Press the CD button (20).
02) Insert a CD (see "Inserting a CD" above).
03) Press the RANDOM button (3).
04) Press the PLAY/PAUSE button (14) - to start playing a random track sequence.
INTRO FUNCTION [ " INTRO " ]
Activating the Intro function can only be done when the CD has stopped. Press the _ INTRO button on the remote control – each track on the inserted CD
is played for 10 seconds.
22
23
24
25
21